What are you searching?

    Zaragoza Maternity Hospital

    The project consisted of a 2,330 m2 expansion, a foundation made of micropiles and an overall reinforcement of the structure and concrete slabs; the flooring was demolished prior to reinforcing it.

    The building was also provided with facilities typical of a new-build hospital, although since it was required to remain operational during the construction, the project had to be carried out in three phases.

    The project affected a total area of 26,330 m2. After a complete evaluation of the existing structure, a design was drafted, and then the foundation and structure were reinforced. This meant that the renovation and expansion project could not start until June of 1987; factoring in the temporary transfers that had to be performed in order to keep the services running, the project took a total of 34 months for all three phases, which works out to less than 11 months per phase.

    The contract was extended to include the adaptation of the Ruiseñores Clinic, the conversion of the current clinic on Calle Oviedo into a basic healthcare unit, stores and workshops, refurbishment of kitchens and the emergency ward, expansion of the radiology department and other projects, increasing to a total of 12 contracts.

    General Information

    Zaragoza, Spain
    Contract type
    The total area is 26,330 m2. In addition to the areas used for outpatient services, the hospital is equipped with 350 beds (190 beds in the maternity ward and 160 in the children's ward), as well as areas for services, changing rooms and supply centres
    Year of project completion

    discover other flagship projects

    Vigo Hospital

    Galicia, Spain

    The €370-million Vigo Hospital represents the largest investment made in a health centre facility currently in construction in Spain.

    New corporate headquarters for BBVA in Madrid

    Madrid, Spain

    Building architecture designed by Herzog and de Meuron.

    Move up